Connect to your network or home router using the provided ethernet cable.
Connect the power adapter. The green ethernet light should power on. Proceed to step 4.
You can scan for channels using the HDHomeRun app (see links below) or by using the web interface:
SiliconDust offers our own DVR service, and the HDHomeRun hardware will also work with a number of third party DVR programs and services.
To perform channel scans, hide channels, update firmware, and more, you can use the HDHomeRun's web page interface. While connected to the same local network as your HDHomeRun, open this link in a web browser:
NOTE: That address will go do the first HDHomeRun device found on your network. If you have more than one HDHomeRun device then you would use the “device ID” printed on the bottom of the unit instead of “hdhomerun” in the address. For example, if your device ID was 104FFFFF then you would go to http://104fffff.local
For more information about the web interface, see webui.