====== Legacy HDHomeRun hardware ====== ===== DUAL (1st and 2nd generation) ===== ^ Model numbers ^ Signal type ^ | HDHR-US | 8-VSB/ATSC & QAM64/256 | | HDHR-EU | DVB-T & DVB-C | ^ Tuners | 2 | ^ Works with DVR | No | ^ Ports | Power, Ethernet (100baseTX), 2x antenna | | **HDHR-US with a Device ID of 1010xxxx to 1012xxxx:** || ^ Power supply | 5Volt 2Amp regulated power adapter (higher Amp rating ok) \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ Max 5.25V @ no-load \\ Min 4.75V @ 2A \\ Noise <= 100mVp-p | | **HDHR-US with a Device ID of 1013xxxx or higher:** || ^ Power supply | 5Volt 1Amp regulated power adapter (higher Amp rating ok) \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ Max 5.25V @ no-load \\ Min 4.75V @ 1A \\ Noise <= 100mVp-p | === HDHR-US-T1 Single === ^ Model numbers | HDHR-US-T1 | ^ Signal type | 8-VSB/ATSC & QAM64/256 | ^ Tuners | 1 | ^ Works with DVR | No | ^ Ports | Power, Ethernet (100baseTX), Antenna | ^ Power supply | 5Volt 1Amp regulated power adapter (higher Amp rating ok) \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ Max 5.25V @ no-load \\ Min 4.75V @ 1A \\ Noise ⇐ 100mVp-p | ===== DUAL (3rd generation) ===== Not to be confused with the [[CONNECT|HDHomeRun CONNECT (HDHR4-2US)]], which uses a similar outer enclosure. ^ Model numbers ^ Signal type ^ | HDHR3-US | 8-VSB/ATSC & QAM64/256 | | HDHR3-DT | DVB-T | | HDHR3-EU | DVB-T & DVB-C | ^ Tuners | 2 | ^ Works with DVR | No | ^ Ports | Power, Ethernet (100baseTX), Antenna | ^ Power supply | 5Volt 1Amp regulated power adapter (higher Amp rating ok) \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ Max 5.25V @ no-load \\ Min 4.75V @ 1A \\ Noise <= 100mVp-p | ===== Updating firmware====== [[:update|See: Updating firmware]] ===== Using the app with legacy hardware ===== [[using_the_app_with_legacy_hardware|See: Using the app with legacy hardware]] ===== See also ===== * [[Third party applications]] * [[hdhomerun_config]] {{tag>hardware legacy}}