====== Installing the DVR storage software to a NAS using a Windows PC ======
<btn type="success" size="xs" icon="fa fa-chevron-left">[[:DVR|Go back to all DVR topics]]</btn>\\
<lead>The HDHomeRun Setup application for Windows has an install tool, allowing users to install the DVR storage software to their NAS from their Windows PC.</lead>

===== Requirements =====
<WRAP indent>

**Before you continue, make sure you have the following:**

  * [[DVR:subscription|HDHomeRun DVR subscription]]
  * One or more compatible HDHomeRun device: see **[[:dvr#hdhomerun_network_tuner|List of DVR compatible HDHomeRun devices]]**

</WRAP>
===== NAS requirements =====
<WRAP indent>

**Make sure your NAS meets the following requirements**

  * x86 or ARM based CPU
  * 256MB RAM minimum
  * Must be running a maintained Linux kernel
  * Must support SSH access

</WRAP>
===== Installing to a NAS from a Windows PC =====
<WRAP indent>

<panel type="success" title="Step 1"><image shape="thumbnail">{{ :step_2_-_installer_1_-_run_installer.png?direct&600|}}</image>
**Download and install the latest HDHomeRun Windows Setup software (not the Windows 10 store App):**

  * **[[http://download.silicondust.com/hdhomerun/hdhomerun_windows.exe|Normal version]]**
  * **[[https://download.silicondust.com/hdhomerun/hdhomerun_windows_beta.exe|Beta version]]**

<WRAP info>Be sure to download a fresh copy of the Windows Setup app, especially if you need to update an existing install.</WRAP>
</panel>

<panel type="success" title="Step 2"><image shape="thumbnail">{{ :step_3_-_setup_app_3_-_nas_install_button.png?direct&600|}}</image>
**Launch the HDHomeRun NAS install program:** 

Run HDHomeRun Setup, go the the DVR tab, and click the NAS Install button.
</panel>

<panel type="success" title="Step 3"><image shape="thumbnail">{{ :step_4_-_nas_install_1_-_select_nas.png?direct&600|}}</image>
**Select your NAS from detected devices:**

The application will auto-detect possible NAS devices on your network using UPnP. Double click on your NAS device to continue.
</panel>

<panel type="success" title="Step 4"><image shape="thumbnail">{{ :step_4_-_nas_install_4_-_create_hdhr_file_share.png?direct&600|}}</image>
**Create a share named "HDHomeRun":**

If there is not already a share named HDHomeRun you will see the message "Please create a share named HDHomeRun".

The install program will auto-detect when the share has been created and continue to the next step.
</panel>

<panel type="success" title="Step 5"><image shape="thumbnail">{{ :step_4_-_nas_install_3_-_log-in_ssh.png?direct&600|}}</image>
**Enable SSH access and log in:**

If SSH access is not enabled you will see the message "Please enable SSH access".

The install program will auto-detect when SSH has been enabled and then ask you to enter your username and password.

<WRAP alert>
Security: Some NAS products use a default username and password for SSH. If this is the case for you, the NAS should be on a home network firewalled by a home router. It may also be a good idea to disable SSH on your NAS when not using the NAS install tool.
</WRAP>
</panel>

<panel type="success" title="Step 6"><image shape="thumbnail">{{ :step_4_-_nas_install_5_-_all_done.png?direct&600|}}</image>
**Success:**

The NAS Install program should download and start the HDHomeRun DVR software and report SUCCESS.
</panel>


<WRAP center important 80%>
**Note:** The current release of the NAS Install program will enable auto-start on WD MyCloud devices. On other NAS devices, the DVR storage software will not automatically start. If you reboot or power cycle the NAS you will need to run the NAS Install program again to restart the HDHomeRun storage software.
</WRAP>

</WRAP>
===== Next step: Using DVR in the HDHomeRun app =====
<WRAP indent>

Once you finish setting up a DVR storage device, see our guide link below for instructions on using the DVR features in the HDHomeRun app.\\
<btn type="success" size="lg" icon="fa fa-book">[[:app|Instructions on using the DVR features in the HDHomeRun app]]</btn>

</WRAP>

===== Beta DVR software =====
<WRAP intent>
{{ :dvr:nas:windows_dvr_beta.png?direct&400|}}
Users can switch from the stable version to the beta versions of the DVR software to their NAS by going to

  - Click on the **Advanced** tab
  - Enable **"Check for beta updates when checking for updates"**
  - Click **Apply**
  - Click back to the **DVR** tab and then follow the normal **NAS install** steps outlined on this page.

<WRAP clear/>

</WRAP>

{{tag>NAS DVR windows}}