====== Checking the health status (SMART) of the hard drive in a SCRIBE or SERVIO ======
[[:SCRIBE|Go back to all SCRIBE topics]]\\
[[:SERVIO|Go back to all SERVIO topics]]
Users can use the SMART (Self-Monitoring, Analysis and Reporting Technology) tool to check the health of the internal drive of their SCRIBE or SERVIO.
Windows: "%programfiles%\Silicondust\HDHomeRun\hdhomerun_config.exe" get /hdd/smart
Max/Linux: hdhomerun_config get /hdd/smart
The RAW column indicates the actual value. The VAL column is a scale from 100 down to 0.
hdhomerun_config 15200446 get /hdd/smart
smart: pass
ID# NAME RAW VAL WST THR
1 Raw_Read_Error_Rate 158576491 82 64 6
3 Spin_Up_Time 0 99 99 0
4 Start_Stop_Count 42 100 100 20
5 Reallocated_Sector_Ct 0 100 100 10
7 Seek_Error_Rate 3338953 65 60 45
9 Power_On_Hours 368 100 100 0
10 Spin_Retry_Count 0 100 100 97
12 Power_Cycle_Count 42 100 100 20
184 End-to-End_Error 0 100 100 99
187 Reported_Uncorrect 0 100 100 0
188 Command_Timeout 0 100 100 0
189 High_Fly_Writes 0 100 100 0
190 Airflow_Temperature_Cel 39 61 52 40
191 G-Sense_Error_Rate 1 100 100 0
192 Power-Off_Retract_Count 38 100 100 0
193 Load_Cycle_Count 53 100 100 0
194 Temperature_Celsius 39 39 48 0
197 Current_Pending_Sector 0 100 100 0
198 Offline_Uncorrectable 0 100 100 0
199 UDMA_CRC_Error_Count 0 200 200 0
240 Head_Flying_Hours 367 100 253 0
241 Total_LBAs_Written 3345712672 100 253 0
242 Total_LBAs_Read 1198966 100 253 0
254 Free_Fall_Sensor 0 100 100 0
Airflow_Temperature_Cel: The RAW value indicates the current temperature in Celsius. Ignore the VAL column - this is an inverted and scaled value and not the current temperature.
{{tag>scribe servio}}