Differences

This shows you the differences between two versions of the page.

--- http_api [2020/05/13 23:04]
neds
+++ http_api [2020/09/20 16:16]
neds
@@ Line 62: / Line 62: @@
 <WRAP indent>
-URLs can also use the channel frequency instead of the virtual channel. Use "ch" instead of "v", and the RF channel number or frequency in Hz instead of the virtual channel number. PID filtering is not currently available.
+URLs can also use the channel frequency instead of the virtual channel. Use "ch" instead of "v", and the RF channel number or frequency in Hz instead of the virtual channel number.
-  * RF 14, which is 473MHz, would be http://192.168.0.100:5004/auto/ch473000000
+  * Example channel 5 is RF 14, which is 473MHz and would be written as <code>http://192.168.0.100:5004/auto/ch473000000</code>
+  * If the channel has sub-channels, you can use the program number to specify the channel with a dash. For example, channel 5.3 might be -3 (program numbers are not always sequential or starting with 1), it would be written as, <code>http://192.168.0.100:5004/auto/ch473000000-3</code>
+</WRAP>
+====Specifying a tuner====
+<WRAP indent>
+The "/auto/" portion of the URL will select the first available tuner. Replacing this with a tuner identifier will force use of a specific tuner. For example:
+  * tuner0 - the first tuner
+  * tuner1 - the second tuner
+  * tuner2 - the third tuner (if you have a 3 or 4 tuner model)
+  * tuner3 - the fourth tuner (if you have a 4 tuner model)
+The URL for using the second tuner might look like this:
+<code>http://192.168.0.100:5004/tuner1/v5.1</code>
 </WRAP>

development