Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
http_api [2020/07/14 05:39]
neds
http_api [2022/09/23 04:25] (current)
neds
Line 5: Line 5:
 The list of available channels can be queried using the following URLs: The list of available channels can be queried using the following URLs:
  
-     ​http://​<device ip>/​lineup.json +     ​http://​hdhomerun.local/​lineup.json 
-     ​http://​<device ip>/lineup.xml+     ​http://​hdhomerun.local/lineup.xml 
 +     ​http://​hdhomerun.local/​lineup.m3u 
 +\\ 
 +//**Note:** "​hdhomerun.local"​ can also be replaced by the deviceID.local or the IP address of the HDHomeRun.//​ 
 +\\
 \\ \\
- 
 The following information is returned for each program: The following information is returned for each program:
   * "​GuideNumber"​ (virtual channel number). For ATSC the number will be "​n.n"​ format. For all other systems the number will be "​n"​ format.   * "​GuideNumber"​ (virtual channel number). For ATSC the number will be "​n.n"​ format. For all other systems the number will be "​n"​ format.
Line 65: Line 68:
   * Example channel 5 is RF 14, which is 473MHz and would be written as <​code>​http://​192.168.0.100:​5004/​auto/​ch473000000</​code>​   * Example channel 5 is RF 14, which is 473MHz and would be written as <​code>​http://​192.168.0.100:​5004/​auto/​ch473000000</​code>​
  
-If the channel has sub-channels,​ you can use the program number to specify the channel with a dash. For example, channel 5.3 might be -3 (program numbers are not always sequential or starting with 1), +  * If the channel has sub-channels,​ you can use the program number to specify the channel with a dash. For example, channel 5.3 might be -3 (program numbers are not always sequential or starting with 1), it would be written as, <​code>​http://​192.168.0.100:​5004/​auto/​ch473000000-3</​code>​ 
 + 
 +</​WRAP>​ 
 +====Specifying a tuner==== 
 +<WRAP indent>​ 
 + 
 +The "/​auto/"​ portion of the URL will select the first available tuner. Replacing this with a tuner identifier will force use of a specific tuner. For example: 
 +  * tuner0 - the first tuner 
 +  * tuner1 - the second tuner 
 +  * tuner2 - the third tuner (if you have a 3 or 4 tuner model) 
 +  * tuner3 - the fourth tuner (if you have a 4 tuner model) 
 + 
 +The URL for using the second tuner might look like this: 
 + 
 +<​code>​http://​192.168.0.100:​5004/​tuner1/​v5.1</​code>​
  
 </​WRAP>​ </​WRAP>​
  • Last modified: 2020/07/14 05:39