Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
legacy_hardware [2019/06/20 04:14]
neds
legacy_hardware [2019/06/28 18:31]
neds [DUAL (3rd generation)]
Line 2: Line 2:
 <WRAP clear/> <WRAP clear/>
  
-===== Dual =====+===== DUAL (1st and 2nd generation) ​=====
 {{:​hdhr-us.jpg?​direct&​400|HDHR-US Front}}{{:​hdhr-us_2.jpg?​direct&​400|HDHR-US Back}} {{:​hdhr-us.jpg?​direct&​400|HDHR-US Front}}{{:​hdhr-us_2.jpg?​direct&​400|HDHR-US Back}}
  
-<WRAP box 60%>+<WRAP box>
 ^ Model numbers ^ Signal type ^ ^ Model numbers ^ Signal type ^
-| HDHR-US | <​wrapper>​8-VSB/​ATSC ​\\ +| HDHR-US | 8-VSB/​ATSC ​QAM64/256 | 
-QAM64/256</​wrapper> ​+| HDHR-EU | DVB-T & DVB-C |
-| HDHR-EU | DVB-T |+
    
 ^ Tuners | 2 | ^ Tuners | 2 |
 ^ Works with DVR | No | ^ Works with DVR | No |
-^ Ports | Power, Ethernet (100baseTX), ​Antenna ​|+^ Ports | Power, Ethernet (100baseTX), ​2x antenna ​| 
 | **HDHR-US with a Device ID of 1010xxxx to 1012xxxx:** || | **HDHR-US with a Device ID of 1010xxxx to 1012xxxx:** ||
 ^ Power supply | <​wrapper>​5V 2A regulated power adapter (higher A rating ok) \\ ^ Power supply | <​wrapper>​5V 2A regulated power adapter (higher A rating ok) \\
Line 29: Line 29:
 </​WRAP>​ </​WRAP>​
  
-===== HDHR-US-T1 Single ​=====+=== HDHR-US-T1 Single ===
 {{:​hdhr-us-t1.jpg?​direct&​400|HDHR-US-T1 Front}}{{:​hdhr-us-t1_2.jpg?​direct&​400|HDHR-US-T1 Back}} {{:​hdhr-us-t1.jpg?​direct&​400|HDHR-US-T1 Front}}{{:​hdhr-us-t1_2.jpg?​direct&​400|HDHR-US-T1 Back}}
  
-<WRAP box 60%>+<WRAP box>
 ^ Model numbers | HDHR-US-T1 | ^ Model numbers | HDHR-US-T1 |
-^ Signal type | 8-VSB/​ATSC ​\\ QAM64/256 |+^ Signal type | 8-VSB/​ATSC ​QAM64/256 |
 ^ Tuners | 1 | ^ Tuners | 1 |
 ^ Works with DVR | No | ^ Works with DVR | No |
 ^ Ports | Power, Ethernet (100baseTX),​ Antenna | ^ Ports | Power, Ethernet (100baseTX),​ Antenna |
-^ Power supply | <​wrapper></​wrapper>​ | +^ Power supply | <​wrapper>​5V 1A regulated power adapter (higher A rating ok) \\ 
 +2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 
 +Max 5.25V @ no-load \\ 
 +Min 4.75V @ 1A \\ 
 +Noise ⇐ 100mVp-p</​wrapper>​ | 
 </​WRAP>​ </​WRAP>​
-===== HDHR3-US ​DUAL =====+ 
 +===== DUAL (3rd generation) ​=====
 {{:​hdhr3-us.jpg?​direct&​400|HDHR3-US Front}}{{:​hdhr3-us_2.jpg?​direct&​400|HDHR3-US Back}} {{:​hdhr3-us.jpg?​direct&​400|HDHR3-US Front}}{{:​hdhr3-us_2.jpg?​direct&​400|HDHR3-US Back}}
-<WRAP center ​round info 80%>+<WRAP center info 80%>
 Not to be confused with the [[CONNECT|HDHomeRun CONNECT (HDHR4-2US)]],​ which uses a similar outer enclosure. Not to be confused with the [[CONNECT|HDHomeRun CONNECT (HDHR4-2US)]],​ which uses a similar outer enclosure.
 </​WRAP>​ </​WRAP>​
  
-===== Guides ​===== +<WRAP box> 
-  ​* ​[[Using the app with older HDHRs]]+^ Model numbers ^ Signal type ^ 
 +| HDHR3-US | 8-VSB/ATSC & QAM64/256 | 
 +| HDHR3-DT | DVB-T | 
 +| HDHR3-EU | DVB-T & DVB-C | 
 + 
 +^ Tuners | 2 | 
 +^ Works with DVR | No | 
 +^ Ports | Power, Ethernet (100baseTX),​ Antenna | 
 +^ Power supply | <​wrapper>​5V 1A regulated power adapter (higher A rating ok) \\ 
 +2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 
 +Max 5.25V @ no-load \\ 
 +Min 4.75V @ 1A \\ 
 +Noise <100mVp-p</​wrapper>​ |  
 +</​WRAP>​ 
 + 
 +===== Using the app with legacy hardware ​===== 
 +<btn type="​success"​ size="​lg"​ icon="​fa fa-chevron-right">​[[using_the_app_with_legacy_hardware|See: ​Using the app with legacy hardware]]</​btn>​ 
 + 
 +===== See also =====
   * [[Third party applications]]   * [[Third party applications]]
 +  * [[hdhomerun_config]]
  
 {{tag>​hardware legacy}} {{tag>​hardware legacy}}
  • Last modified: 2019/10/08 00:53