This is an old revision of the document!


The HDHomeRun CONNECT 4K is the first HDHomeRun ATSC 3.0 model from Silicondust.

Model numbers Tuners Signal type
CONNECT 4K HDHR5-4K 4 ATSC 3.0 (two tuners), ATSC 1.0 (all tuners), & QAM64/256
Works with DVR Yes
Size 3.4“x3.4”x0.8“
Ports Antenna, Ethernet (100baseTX), Power
Power supply

5Volt 1.5Amp regulated power adapter (higher Amp rating ok)
1.7mm ID / 4.0mm OD plug, 9.5mm depth, center positive
Max 5.25V @ no-load Max 5.25V @ no-load
Min 4.75V @ 1.5A Min 4.75V @ 1.5A
Noise ⇐ 150mVp-p 150mVp-p

The HDHomeRun CONNECT DUO and HDHomeRun CONNECT QUATRO are 5th generation HDHomeRun network tuners.

Model numbers Tuners Signal type
CONNECT DUO HDHR5-2US 2 8-VSB/ATSC & QAM64/256
HDHR5-2DT 2 DVB-T/T2 & DVB-C
CONNECT QUATRO HDHR5-4US 4 8-VSB/ATSC & QAM64/256
HDHR5-4DT 4 DVB-T/T2 & DVB-C
Works with DVR Yes
Size 3.4”x3.4“x0.8”
Ports Antenna, Ethernet (100baseTX), Power
Power supply

5V 1.5Amp regulated power adapter (higher Amp rating ok)
1.7mm ID / 4.0mm OD plug, 9.5mm depth, center positive
Max 5.25V @ no-load Max 5.25V @ no-load
Min 4.75V @ 1.5A Min 4.75V @ 1.5A
Noise ⇐ 150mVp-p 150mVp-p

Model numbers Signal type
HDHR4-2US 8-VSB/ATSC & QAM64/256
HDHR4-2DT DVB-T/T2
HDHR4-2IS ISDB-T
Tuners 2
Works with DVR Yes
Size
Ports Antenna, Ethernet (100baseTX), Power
Power supply

5Volt 1Amp regulated power adapter (higher Amp rating ok)
2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive
Max 5.25V @ no-load Max 5.25V @ no-load
Min 4.75V @ 1A Min 4.75V @ 1A
Noise ⇐ 100mVp-p 100mVp-p

</WRAP>

See also: other FAQ listings

Leftmost LED on HDHomeRun is blinking green

This indicates that the HDHomeRun has a network connection but is not getting an IP address from your router. Check to make sure that the DHCP function is enabled on your router, and that either the allowed devices/access control/MAC filtering function on the router is disabled, or that the HDHomeRun is on the allowed list.

Leftmost LED on HDHomeRun is solid red

This indicates that the HDHomeRun does not have a network connection. Please try a different network cable and port on your switch/router. If the issue persists, please open a trouble ticket.

  • Last modified: 2022/12/06 21:03