This is an old revision of the document!
HDHomeRun CONNECT
CONNECT 4K
The HDHomeRun CONNECT 4K is the first HDHomeRun ATSC 3.0 model from Silicondust.
Model numbers | Tuners | Signal type | |
---|---|---|---|
CONNECT 4K | HDHR5-4K | 4 | ATSC 3.0 (two tuners), ATSC 1.0 (all tuners), & QAM64/256 |
Works with DVR | Yes |
---|---|
Size | 3.4“x3.4”x0.8“ |
Ports | Antenna, Ethernet (100baseTX), Power |
Power supply |
5Volt 1.5Amp regulated power adapter (higher Amp rating ok) |
CONNECT DUO & QUATRO (5th generation)
The HDHomeRun CONNECT DUO and HDHomeRun CONNECT QUATRO are 5th generation HDHomeRun network tuners.
Model numbers | Tuners | Signal type | |
---|---|---|---|
CONNECT DUO | HDHR5-2US | 2 | 8-VSB/ATSC & QAM64/256 |
HDHR5-2DT | 2 | DVB-T/T2 & DVB-C | |
CONNECT QUATRO | HDHR5-4US | 4 | 8-VSB/ATSC & QAM64/256 |
HDHR5-4DT | 4 | DVB-T/T2 & DVB-C |
Works with DVR | Yes |
---|---|
Size | 3.4”x3.4“x0.8” |
Ports | Antenna, Ethernet (100baseTX), Power |
Power supply |
5V 1.5Amp regulated power adapter (higher Amp rating ok) |
CONNECT (4th generation)
Model numbers | Signal type |
---|---|
HDHR4-2US | 8-VSB/ATSC & QAM64/256 |
HDHR4-2DT | DVB-T/T2 |
HDHR4-2IS | ISDB-T |
Tuners | 2 |
---|---|
Works with DVR | Yes |
Size | |
Ports | Antenna, Ethernet (100baseTX), Power |
Power supply |
5Volt 1Amp regulated power adapter (higher Amp rating ok) |
FAQ and LED status
Leftmost LED on HDHomeRun is blinking green
This indicates that the HDHomeRun has a network connection but is not getting an IP address from your router. Check to make sure that the DHCP function is enabled on your router, and that either the allowed devices/access control/MAC filtering function on the router is disabled, or that the HDHomeRun is on the allowed list.
Leftmost LED on HDHomeRun is solid red
This indicates that the HDHomeRun does not have a network connection. Please try a different network cable and port on your switch/router. If the issue persists, please open a trouble ticket.