Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
dual [2019/06/21 00:07] – created nedsdual [2022/09/30 22:40] (current) – neds
Line 1: Line 1:
-~~REDIRECT>legacy_hardware~~+====== Legacy HDHomeRun hardware ====== 
 +<WRAP clear/> 
 + 
 +===== DUAL (1st and 2nd generation) ===== 
 + 
 +<WRAP box> 
 +^ Model numbers ^ Signal type ^ 
 +| HDHR-US | 8-VSB/ATSC & QAM64/256 | 
 +| HDHR-EU | DVB-T & DVB-C | 
 +  
 +^ Tuners | 2 | 
 +^ Works with DVR | No | 
 +^ Ports | Power, Ethernet (100baseTX), 2x antenna | 
 + 
 +| **HDHR-US with a Device ID of 1010xxxx to 1012xxxx:** || 
 +^ Power supply | <wrapper>5Volt 2Amp regulated power adapter (higher Amp rating ok) \\ 
 +2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 
 +Max 5.25V @ no-load \\ 
 +Min 4.75V @ 2A \\ 
 +Noise <= 100mVp-p</wrapper> |  
 + 
 +| **HDHR-US with a Device ID of 1013xxxx or higher:** || 
 +^ Power supply | <wrapper>5Volt 1Amp regulated power adapter (higher Amp rating ok) \\ 
 +2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 
 +Max 5.25V @ no-load \\ 
 +Min 4.75V @ 1A \\ 
 +Noise <= 100mVp-p</wrapper> |  
 +</WRAP> 
 + 
 +=== HDHR-US-T1 Single === 
 + 
 +<WRAP box> 
 +^ Model numbers | HDHR-US-T1 | 
 +^ Signal type | 8-VSB/ATSC & QAM64/256 | 
 +^ Tuners | 1 | 
 +^ Works with DVR | No | 
 +^ Ports | Power, Ethernet (100baseTX), Antenna | 
 +^ Power supply | <wrapper>5Volt 1Amp regulated power adapter (higher Amp rating ok) \\ 
 +2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 
 +Max 5.25V @ no-load \\ 
 +Min 4.75V @ 1A \\ 
 +Noise ⇐ 100mVp-p</wrapper> |  
 +</WRAP> 
 + 
 +===== DUAL (3rd generation) ===== 
 +<WRAP center info 80%> 
 +Not to be confused with the [[CONNECT|HDHomeRun CONNECT (HDHR4-2US)]], which uses a similar outer enclosure. 
 +</WRAP> 
 + 
 +<WRAP box> 
 +^ Model numbers ^ Signal type ^ 
 +| HDHR3-US | 8-VSB/ATSC & QAM64/256 | 
 +| HDHR3-DT | DVB-T | 
 +| HDHR3-EU | DVB-T & DVB-C | 
 + 
 +^ Tuners | 2 | 
 +^ Works with DVR | No | 
 +^ Ports | Power, Ethernet (100baseTX), Antenna | 
 +^ Power supply | <wrapper>5Volt 1Amp regulated power adapter (higher Amp rating ok) \\ 
 +2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 
 +Max 5.25V @ no-load \\ 
 +Min 4.75V @ 1A \\ 
 +Noise <= 100mVp-p</wrapper> |  
 +</WRAP> 
 +===== Updating firmware====== 
 +<WRAP indent> 
 + 
 +<btn type="success" size="lg" icon="fa fa-chevron-right">[[:update|See: Updating firmware]]</btn> 
 + 
 +</WRAP> 
 + 
 +===== Using the app with legacy hardware ===== 
 +<btn type="success" size="lg" icon="fa fa-chevron-right">[[using_the_app_with_legacy_hardware|See: Using the app with legacy hardware]]</btn> 
 + 
 +===== See also ===== 
 +  * [[Third party applications]] 
 +  * [[hdhomerun_config]] 
 + 
 +{{tag>hardware legacy}}
  • Last modified: 2019/06/21 00:07