Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
dual [2019/10/08 00:53] – nedsdual [2026/05/14 02:09] (current) – neds
Line 3: Line 3:
  
 ===== DUAL (1st and 2nd generation) ===== ===== DUAL (1st and 2nd generation) =====
-{{:hdhr-us.jpg?direct&400|HDHR-US Front}}{{:hdhr-us_2.jpg?direct&400|HDHR-US Back}} 
  
 <WRAP box> <WRAP box>
Line 11: Line 10:
    
 ^ Tuners | 2 | ^ Tuners | 2 |
-^ Works with DVR | No |+^ Works with HDHomeRun [[:DVR]] | No |
 ^ Ports | Power, Ethernet (100baseTX), 2x antenna | ^ Ports | Power, Ethernet (100baseTX), 2x antenna |
  
 | **HDHR-US with a Device ID of 1010xxxx to 1012xxxx:** || | **HDHR-US with a Device ID of 1010xxxx to 1012xxxx:** ||
-^ Power supply | <wrapper>5V 2A regulated power adapter (higher A rating ok) \\+^ Power supply | <wrapper>5Volt 2Amp regulated power adapter (higher Amp rating ok) \\
 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\
 Max 5.25V @ no-load \\ Max 5.25V @ no-load \\
Line 22: Line 21:
  
 | **HDHR-US with a Device ID of 1013xxxx or higher:** || | **HDHR-US with a Device ID of 1013xxxx or higher:** ||
-^ Power supply | <wrapper>5V 1A regulated power adapter (higher A rating ok) \\+^ Power supply | <wrapper>5Volt 1Amp regulated power adapter (higher Amp rating ok) \\
 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\
 Max 5.25V @ no-load \\ Max 5.25V @ no-load \\
Line 30: Line 29:
  
 === HDHR-US-T1 Single === === HDHR-US-T1 Single ===
-{{:hdhr-us-t1.jpg?direct&400|HDHR-US-T1 Front}}{{:hdhr-us-t1_2.jpg?direct&400|HDHR-US-T1 Back}} 
  
 <WRAP box> <WRAP box>
Line 36: Line 34:
 ^ Signal type | 8-VSB/ATSC & QAM64/256 | ^ Signal type | 8-VSB/ATSC & QAM64/256 |
 ^ Tuners | 1 | ^ Tuners | 1 |
-^ Works with DVR | No |+^ Works with HDHomeRun [[:DVR]] | No |
 ^ Ports | Power, Ethernet (100baseTX), Antenna | ^ Ports | Power, Ethernet (100baseTX), Antenna |
-^ Power supply | <wrapper>5V 1A regulated power adapter (higher A rating ok) \\+^ Power supply | <wrapper>5Volt 1Amp regulated power adapter (higher Amp rating ok) \\
 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\
 Max 5.25V @ no-load \\ Max 5.25V @ no-load \\
Line 46: Line 44:
  
 ===== DUAL (3rd generation) ===== ===== DUAL (3rd generation) =====
-{{:hdhr3-us.jpg?direct&400|HDHR3-US Front}}{{:hdhr3-us_2.jpg?direct&400|HDHR3-US Back}} 
 <WRAP center info 80%> <WRAP center info 80%>
 Not to be confused with the [[CONNECT|HDHomeRun CONNECT (HDHR4-2US)]], which uses a similar outer enclosure. Not to be confused with the [[CONNECT|HDHomeRun CONNECT (HDHR4-2US)]], which uses a similar outer enclosure.
Line 58: Line 55:
  
 ^ Tuners | 2 | ^ Tuners | 2 |
-^ Works with DVR | No |+^ Works with HDHomeRun [[:DVR]] | No |
 ^ Ports | Power, Ethernet (100baseTX), Antenna | ^ Ports | Power, Ethernet (100baseTX), Antenna |
-^ Power supply | <wrapper>5V 1A regulated power adapter (higher A rating ok) \\+^ Power supply | <wrapper>5Volt 1Amp regulated power adapter (higher Amp rating ok) \\
 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\
 Max 5.25V @ no-load \\ Max 5.25V @ no-load \\
 Min 4.75V @ 1A \\ Min 4.75V @ 1A \\
 Noise <= 100mVp-p</wrapper> |  Noise <= 100mVp-p</wrapper> | 
 +</WRAP>
 +===== Updating firmware======
 +<WRAP indent>
 +
 +<btn type="success" size="lg" icon="fa fa-chevron-right">[[:update|See: Updating firmware]]</btn>
 +
 </WRAP> </WRAP>
  
  • Last modified: 2019/10/08 00:53