Differences

This shows you the differences between two versions of the page.

--- dvr:nas:wd:single [2019/06/16 04:41] – neds
+++ dvr:nas:wd:single [2022/11/09 03:31] (current) – neds
@@ Line 1: / Line 1: @@
-====== Setting up DVR storage on a WD My Cloud NAS ======
+====== Setting up DVR storage on a single-drive WD My Cloud NAS ======
-How to install the DVR storage software on a single-disk Western Digital My Cloud NAS.
+<lead>How to install the DVR storage software on a single-disk Western Digital My Cloud NAS.</lead>
-<WRAP center round info 80%>
+<WRAP center info 60%>
 Users of multi-disk My Cloud devices should install the appropriate package via the **[[:dvr:nas:wd:multiple|WD My Cloud multiple-disk install instructions]]**.
 </WRAP>
 ===== Requirements =====
+<WRAP indent>
+**Before you continue, make sure you have the following:**
-  * [[DVR:subscription|HDHomeRun DVR subscription ($35 per year with 2 free month trial)]]
+  * [[DVR:subscription|HDHomeRun DVR subscription]]
-  * Compatible HDHomeRun device: SCRIBE [[:SCRIBE Duo|Duo]]/[[:SCRIBE Quatro|Quatro]], [[:SERVIO]], CONNECT [[:CONNECT Duo|Duo]]/[[:CONNECT Quatro|Quatro]], [[:EXTEND]], [[:CONNECT]](4th gen), [[:PRIME]], [[:PRIME 6]]
+  * One or more compatible HDHomeRun device: see **[[:dvr tuners|List of DVR compatible HDHomeRun devices]]**
   * **A non-"Home" WD My Cloud NAS**
+</WRAP>
-===== Install to NAS using a Windows PC =====
+===== Install to NAS using a PC =====
-If you have a Windows PC, you can use our HDHomeRun setup application to install the DVR storage software to your NAS device. **See: [[DVR:NAS:Install from Windows PC]]**
+<WRAP indent>
+<panel type="success" title="Step 1"><image shape="thumbnail">{{ :step_2_-_installer_1_-_run_installer.png?direct&600|}}</image>
+**Download and install the latest HDHomeRun Windows Setup software (not the Windows 10 store App):**
-===== Manual installation =====
+  * **[[http://download.silicondust.com/hdhomerun/hdhomerun_windows.exe|Normal version]]**
+  * **[[https://download.silicondust.com/hdhomerun/hdhomerun_windows_beta.exe|Beta version]]**
+<WRAP info>Be sure to download a fresh copy of the Windows Setup app, especially if you need to update an existing install.</WRAP>
+</panel>
-These instructions are provided for users who cannot run the Windows install tool.
+<panel type="success" title="Step 2"><image shape="thumbnail">{{ :step_3_-_setup_app_3_-_nas_install_button.png?direct&600|}}</image>
+**Launch the HDHomeRun NAS install program:**
+Run HDHomeRun Setup, go the the DVR tab, and click the NAS Install button.
+</panel>
+<panel type="success" title="Step 3"><image shape="thumbnail">{{ :step_4_-_nas_install_1_-_select_nas.png?direct&600|}}</image>
+**Select your NAS from detected devices:**
+<wrap tip>Western Digital now uses "sshd" instead of "root" for the ssh username.</wrap>
+The application will auto-detect possible NAS devices on your network using UPnP. Double click on your NAS device to continue.
+</panel>
+<panel type="success" title="Step 4"><image shape="thumbnail">{{ :step_4_-_nas_install_4_-_create_hdhr_file_share.png?direct&600|}}</image>
+**Create a share named "HDHomeRun":**
+If there is not already a share named HDHomeRun you will see the message "Please create a share named HDHomeRun".
+The install program will auto-detect when the share has been created and continue to the next step.
+</panel>
+<panel type="success" title="Step 5"><image shape="thumbnail">{{ :step_4_-_nas_install_3_-_log-in_ssh.png?direct&600|}}</image>
+**Enable SSH access and log in:**
+If SSH access is not enabled you will see the message "Please enable SSH access".
+The install program will auto-detect when SSH has been enabled and then ask you to enter your username and password.
+</panel>
+<panel type="success" title="Step 6"><image shape="thumbnail">{{ :step_4_-_nas_install_5_-_all_done.png?direct&600|}}</image>
+**Success:**
+The NAS Install program should download and start the HDHomeRun DVR software and report SUCCESS.
+Don't forget to turn SSH back off when you are done.
+</panel>
-<WRAP center round important 80%>
-Users of multi-disk My Cloud devices should not install use these instructions. Please follow the instructions **[[DVR/WD|here]]** instead.
 </WRAP>
+===== Manual installation =====
+<WRAP indent>
+These instructions are provided for users who cannot run the Windows install tool.
   - Go to the NAS webpage. This is usually available at http://wdmycloud/ or http://wdmycloud.local/. If you know the IP address of your My Cloud you can also enter that in your browser's address bar. Log in once you arrive at the page.
-  - Enable SSH support. Go to the Settings page, Network, and set SSH to ON. <WRAP center round alert 80%>
+  - <wrapper>Enable SSH support. Go to the Settings page, Network, and set SSH to ON.
-Security: Some NAS products use a default username and password for SSH. If this is the case for you, the NAS should be on a home network firewalled by a home router. It may also be a good idea to disable SSH on your WD My Cloud when not using the NAS install tool.
+<WRAP tip>Western Digital now uses "sshd" instead of "root" for the ssh username.</WRAP></wrapper>
-</WRAP>
+  - <wrapper>Open a terminal window (on Mac OS, open Terminal.app. For Windows 10 **[[https://www.howtogeek.com/336775/how-to-enable-and-use-windows-10s-built-in-ssh-commands/|click here]]**) and type "ssh sshd@wdmycloud" or "ssh sshd@<ip address of My Cloud>", e.g. "ssh sshd@192.168.0.102"
-  - <wrapper>Open a terminal window (on Mac OS, open Terminal.app) and type "ssh root@wdmycloud" or "ssh root@<ip address of My Cloud>", e.g. "ssh root@192.168.0.102"
  Log in with the same password you use to access the web interface.</wrapper>
-  - Download the HDHomeRun DVR software package. Run the following command:<code>wget -O /tmp/hdhomerun_dvr.apkg http://download.silicondust.com/hdhomerun/hdhomerun_record_wdc_WDMyCloud.apkg</code>
+  - Download the HDHomeRun DVR software package by running one of the following (just choose one): <WRAP>
+^ Version ^ Command ^
+| OS 5 - Stable | <code>wget -O /tmp/hdhomerun_dvr.apkg https://download.silicondust.com/hdhomerun/hdhomerun_record_wdc_WDMyCloud_os5.apkg</code> |
+| OS 5 - Beta | <code>wget -O /tmp/hdhomerun_dvr.apkg https://download.silicondust.com/hdhomerun/hdhomerun_record_wdc_WDMyCloud_os5_beta.apkg</code> |
+</WRAP>
   - Install the HDHomeRun DVR software package. Run the following command: <code>upload_apkg -d -s 1 -p ../../../../../tmp/hdhomerun_dvr.apkg</code>
   - Start the DVR. Run the following command: <code>/mnt/HD/HD_a2/Nas_Prog/hdhomerun_dvr/start.sh</code>
+  - Disable SSH support. Go to the Settings page, Network, and set SSH to OFF.
+</WRAP>
+===== Older WD NAS models =====
+<WRAP indent>
+Manual installation for older WD NAS models that don't support install packages:
+  - Go to the NAS webpage. This is usually available at http://wdmycloud/ or http://wdmycloud.local/. If you know the IP address of your My Cloud you can also enter that in your browser's address bar. Log in once you arrive at the page.
+  - <wrapper>Enable SSH support. Go to the Settings page, Network, and set SSH to ON.
+<WRAP tip>Western Digital now uses "sshd" instead of "root" for the ssh username.</WRAP></wrapper>
+  - <wrapper>Open a terminal window (on Mac OS, open Terminal.app. For Windows 10 **[[https://www.howtogeek.com/336775/how-to-enable-and-use-windows-10s-built-in-ssh-commands/|click here]]**) and type "ssh sshd@wdmycloud" or "ssh sshd@<ip address of My Cloud>", e.g. "ssh sshd@192.168.0.102"
+ Log in with the same password you use to access the web interface.</wrapper>
+  - <wrapper>Copy and paste the following commands one by one, pressing return/enter after each line:
+<code>cd /shares/HDHomeRun
+wget -O hdhomerun_record http://download.silicondust.com/hdhomerun/hdhomerun_record_linux
+dd if=hdhomerun_record bs=4096 skip=1 | tar -xz hdhomerun_record_arm
+sudo chmod +x hdhomerun_record_arm
+echo -e \#\!/bin/sh\\n/shares/HDHomeRun/hdhomerun_record_arm \$1 --conf /shares/HDHomeRun/hdhomerun.conf | sudo tee /etc/init.d/hdhomerun_record
+sudo chmod +x /etc/init.d/hdhomerun_record
+sudo ln -sf /etc/init.d/hdhomerun_record /etc/rc2.d/S99HDHomeRun
+echo RecordPath=/shares/HDHomeRun/ | sudo tee /shares/HDHomeRun/hdhomerun.conf
+sudo /etc/init.d/hdhomerun_record start</code></wrapper>
+  - Disable SSH support. Go to the Settings page, Network, and set SSH to OFF.
+</WRAP>
 =====FAQ=====
+<WRAP indent>
   * **Q:** If the NAS loses power or reboots will the Record Engine autostart?
@@ Line 47: / Line 134: @@
   * **A:** SSH in (see step 3 above) and run: <code>del_apkg hdhomerun_dvr</code>
-===== Using DVR =====
+</WRAP>
-Now that everything is set up, see our page **[[:using_the_app]]** for instructions on the DVR features.
+===== Next step: Using DVR in the HDHomeRun app =====
+<WRAP indent>
+Once you finish setting up a DVR storage device, see our guide link below for instructions on using the DVR features in the HDHomeRun app.\\
+<btn type="success" size="lg" icon="fa fa-book">[[:app|Instructions on using the DVR features in the HDHomeRun app]]</btn>
+</WRAP>
-{{tag>NAS_DVR}}
+{{tag>NAS DVR}}

nas dvr