Differences

This shows you the differences between two versions of the page.

--- dvr:nas:wd:single [2022/11/09 03:10] – [Older WD NAS models] neds
+++ dvr:nas:wd:single [2022/11/09 03:31] (current) – neds
@@ Line 55: / Line 55: @@
 The install program will auto-detect when SSH has been enabled and then ask you to enter your username and password.
-<WRAP alert>
-Security: Some NAS products use a default username and password for SSH. If this is the case for you, the NAS should be on a home network firewalled by a home router. It may also be a good idea to disable SSH on your NAS when not using the NAS install tool.
-</WRAP>
 </panel>
 <panel type="success" title="Step 6"><image shape="thumbnail">{{ :step_4_-_nas_install_5_-_all_done.png?direct&600|}}</image>
 **Success:**
 The NAS Install program should download and start the HDHomeRun DVR software and report SUCCESS.
+Don't forget to turn SSH back off when you are done.
 </panel>
@@ Line 74: / Line 72: @@
   - Go to the NAS webpage. This is usually available at http://wdmycloud/ or http://wdmycloud.local/. If you know the IP address of your My Cloud you can also enter that in your browser's address bar. Log in once you arrive at the page.
   - <wrapper>Enable SSH support. Go to the Settings page, Network, and set SSH to ON.
-<WRAP alert>Security: Some NAS products use a default username and password for SSH. If this is the case for you, the NAS should be on a home network firewalled by a home router. It may also be a good idea to disable SSH on your WD My Cloud when not needed.</WRAP>
 <WRAP tip>Western Digital now uses "sshd" instead of "root" for the ssh username.</WRAP></wrapper>
   - <wrapper>Open a terminal window (on Mac OS, open Terminal.app. For Windows 10 **[[https://www.howtogeek.com/336775/how-to-enable-and-use-windows-10s-built-in-ssh-commands/|click here]]**) and type "ssh sshd@wdmycloud" or "ssh sshd@<ip address of My Cloud>", e.g. "ssh sshd@192.168.0.102"
@@ Line 87: / Line 84: @@
   - Install the HDHomeRun DVR software package. Run the following command: <code>upload_apkg -d -s 1 -p ../../../../../tmp/hdhomerun_dvr.apkg</code>
   - Start the DVR. Run the following command: <code>/mnt/HD/HD_a2/Nas_Prog/hdhomerun_dvr/start.sh</code>
+  - Disable SSH support. Go to the Settings page, Network, and set SSH to OFF.
 </WRAP>
@@ Line 97: / Line 95: @@
   - Go to the NAS webpage. This is usually available at http://wdmycloud/ or http://wdmycloud.local/. If you know the IP address of your My Cloud you can also enter that in your browser's address bar. Log in once you arrive at the page.
   - <wrapper>Enable SSH support. Go to the Settings page, Network, and set SSH to ON.
-<WRAP alert>Security: Some NAS products use a default username and password for SSH. If this is the case for you, the NAS should be on a home network firewalled by a home router. It may also be a good idea to disable SSH on your WD My Cloud when not needed.</WRAP>
 <WRAP tip>Western Digital now uses "sshd" instead of "root" for the ssh username.</WRAP></wrapper>
   - <wrapper>Open a terminal window (on Mac OS, open Terminal.app. For Windows 10 **[[https://www.howtogeek.com/336775/how-to-enable-and-use-windows-10s-built-in-ssh-commands/|click here]]**) and type "ssh sshd@wdmycloud" or "ssh sshd@<ip address of My Cloud>", e.g. "ssh sshd@192.168.0.102"
  Log in with the same password you use to access the web interface.</wrapper>
-  - <wrapper>Enter the following commands one by one, pressing return/enter after each line:
+  - <wrapper>Copy and paste the following commands one by one, pressing return/enter after each line:
 <code>cd /shares/HDHomeRun
@@ Line 120: / Line 117: @@
 echo RecordPath=/shares/HDHomeRun/ | sudo tee /shares/HDHomeRun/hdhomerun.conf
-sudo /etc/init.d/hdhomerun_record start</code>
+sudo /etc/init.d/hdhomerun_record start</code></wrapper>
-</wrapper>
+  - Disable SSH support. Go to the Settings page, Network, and set SSH to OFF.
 </WRAP>

nas dvr