Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| flex [2026/02/05 01:37] – nickk | flex [2026/05/14 00:53] (current) – neds | ||
|---|---|---|---|
| Line 3: | Line 3: | ||
| For the most recent documentation and help with ATSC 3.0 broadcasts, please visit our support forum here: **https:// | For the most recent documentation and help with ATSC 3.0 broadcasts, please visit our support forum here: **https:// | ||
| </ | </ | ||
| - | < | + | < |
| <WRAP box> | <WRAP box> | ||
| Line 9: | Line 9: | ||
| | FLEX DUO | HDFX-2US | 2 | ATSC 1.0 & QAM64/256 x 2 | | | FLEX DUO | HDFX-2US | 2 | ATSC 1.0 & QAM64/256 x 2 | | ||
| | FLEX QUATRO | HDFX-4US | 4 | ATSC 1.0 & QAM64/256 x 4 | | | FLEX QUATRO | HDFX-4US | 4 | ATSC 1.0 & QAM64/256 x 4 | | ||
| - | | ::: | HDFX-4DT | 4 | DVB-T/T2 & DVB-C | | + | | ::: | HDFX-4DT | 4 | DVB-T/T2 & DVB-C (including 4K broadcasts) |
| - | | FLEX 4K | HDFX-4K | 4 | ATSC 3.0/1.0 x 2 tuners, ATSC 1.0 x 2 tuners (all tuners also support QAM64/256) | | + | | FLEX 4K | HDFX-4K | 4 | Both ATSC 3.0 and 1.0 are supported on 2 tuners |
| - | ^ Works with DVR | Yes | | + | ^ Works with HDHomeRun [[:DVR]] | Yes | |
| ^ Size | 3.4" | ^ Size | 3.4" | ||
| ^ Ports | Antenna, Ethernet (100baseTX), | ^ Ports | Antenna, Ethernet (100baseTX), | ||
| - | ^ Power supply | + | ^ Power supply |
| </ | </ | ||
| Line 27: | Line 27: | ||
| ===== DVR storage mode ===== | ===== DVR storage mode ===== | ||
| <WRAP indent> | <WRAP indent> | ||
| - | This section mainly applies to the optional **[[DVR|HDHomeRun | + | <btn type=" |
| - | * With a paid subscription the FLEX can record shows to a hard drive connected to the FLEX's built-in USB port. | + | |
| * The USB port can also act as an extended buffer for pausing live TV in the HDHomeRun app, and that pause-buffer feature is free to all users. | * The USB port can also act as an extended buffer for pausing live TV in the HDHomeRun app, and that pause-buffer feature is free to all users. | ||
| - | * Third party DVR services such as Plex, Channels, Jellyfin, Emby, and others, will not use the USB port on the FLEX for DVR storage. Please consult the documentation for those programs about their DVR server requirements. | + | * One-off " |
| + | * Recording more than three days in advance, and setting up automatic or " | ||
| * We recommend avoiding USB " | * We recommend avoiding USB " | ||
| * Solid State Drives (SSDs) are supported, but not required. A mechanical spinning hard disk drive (HDD) will easily support recording four simultaneous channels at the same time. | * Solid State Drives (SSDs) are supported, but not required. A mechanical spinning hard disk drive (HDD) will easily support recording four simultaneous channels at the same time. | ||
| * We recommend at least 500GB or larger. 500GB will provide approximately 150 hours of DVR recording. | * We recommend at least 500GB or larger. 500GB will provide approximately 150 hours of DVR recording. | ||
| * The FLEX supports up to 18TB of storage. A drive larger than 18TB will work however the FLEX will only use the first 18TB of the larger drive. | * The FLEX supports up to 18TB of storage. A drive larger than 18TB will work however the FLEX will only use the first 18TB of the larger drive. | ||
| - | * The USB port will support 5 volts up to 1.0 amps of power. | + | * The USB port will support 5 volts up to 1.0 amps of power with the included power supply. |
| **Setting up the USB hard drive on the FLEX:** | **Setting up the USB hard drive on the FLEX:** | ||
| Line 48: | Line 48: | ||
| </ | </ | ||
| {{tag> | {{tag> | ||
| + | {{tag> | ||