Differences

This shows you the differences between two versions of the page.

--- http_api [2020/07/14 05:40] – neds
+++ http_api [2022/09/23 04:25] (current) – neds
@@ Line 5: / Line 5: @@
 The list of available channels can be queried using the following URLs:
-     http://<device ip>/lineup.json
+     http://hdhomerun.local/lineup.json
-     http://<device ip>/lineup.xml
+     http://hdhomerun.local/lineup.xml
+     http://hdhomerun.local/lineup.m3u
+\\
+//**Note:** "hdhomerun.local" can also be replaced by the deviceID.local or the IP address of the HDHomeRun.//
+\\
 \\
 The following information is returned for each program:
   * "GuideNumber" (virtual channel number). For ATSC the number will be "n.n" format. For all other systems the number will be "n" format.
@@ Line 66: / Line 69: @@
   * If the channel has sub-channels, you can use the program number to specify the channel with a dash. For example, channel 5.3 might be -3 (program numbers are not always sequential or starting with 1), it would be written as, <code>http://192.168.0.100:5004/auto/ch473000000-3</code>
+</WRAP>
+====Specifying a tuner====
+<WRAP indent>
+The "/auto/" portion of the URL will select the first available tuner. Replacing this with a tuner identifier will force use of a specific tuner. For example:
+  * tuner0 - the first tuner
+  * tuner1 - the second tuner
+  * tuner2 - the third tuner (if you have a 3 or 4 tuner model)
+  * tuner3 - the fourth tuner (if you have a 4 tuner model)
+The URL for using the second tuner might look like this:
+<code>http://192.168.0.100:5004/tuner1/v5.1</code>
 </WRAP>

development