Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
legacy_hardware [2019/06/20 04:28] – nedslegacy_hardware [2019/10/08 00:53] (current) – neds
Line 1: Line 1:
-====== Legacy HDHomeRun hardware ====== +~~REDIRECT>dual~~
-<WRAP clear/> +
- +
-===== DUAL (1st and 2nd generation) ===== +
-{{:hdhr-us.jpg?direct&400|HDHR-US Front}}{{:hdhr-us_2.jpg?direct&400|HDHR-US Back}} +
- +
-<WRAP box 60%> +
-^ Model numbers ^ Signal type ^ +
-| HDHR-US | <wrapper>8-VSB/ATSC \\ +
-QAM64/256</wrapper> | +
-| HDHR-EU | DVB-T \\ DVB-C | +
-  +
-^ Tuners | 2 | +
-^ Works with DVR | No | +
-^ Ports | Power, Ethernet (100baseTX), 2x antenna | +
- +
-| **HDHR-US with a Device ID of 1010xxxx to 1012xxxx:** || +
-^ Power supply | <wrapper>5V 2A regulated power adapter (higher A rating ok) \\ +
-2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ +
-Max 5.25V @ no-load \\ +
-Min 4.75V @ 2A \\ +
-Noise <= 100mVp-p</wrapper> |  +
- +
-| **HDHR-US with a Device ID of 1013xxxx or higher:** || +
-^ Power supply | <wrapper>5V 1A regulated power adapter (higher A rating ok) \\ +
-2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ +
-Max 5.25V @ no-load \\ +
-Min 4.75V @ 1A \\ +
-Noise <= 100mVp-p</wrapper> |  +
-</WRAP> +
- +
-=== HDHR-US-T1 Single === +
-{{:hdhr-us-t1.jpg?direct&400|HDHR-US-T1 Front}}{{:hdhr-us-t1_2.jpg?direct&400|HDHR-US-T1 Back}} +
- +
-<WRAP box 60%> +
-^ Model numbers | HDHR-US-T1 | +
-^ Signal type | 8-VSB/ATSC \\ QAM64/256 | +
-^ Tuners | 1 | +
-^ Works with DVR | No | +
-^ Ports | Power, Ethernet (100baseTX), Antenna | +
-^ Power supply | <wrapper></wrapper> |  +
-</WRAP> +
- +
-===== DUAL (3rd generation) ===== +
-{{:hdhr3-us.jpg?direct&400|HDHR3-US Front}}{{:hdhr3-us_2.jpg?direct&400|HDHR3-US Back}} +
-<WRAP center round info 80%> +
-Not to be confused with the [[CONNECT|HDHomeRun CONNECT (HDHR4-2US)]], which uses a similar outer enclosure. +
-</WRAP> +
- +
-<WRAP box 60%> +
-^ Model numbers ^ Signal type ^ +
-| HDHR3-US | 8-VSB/ATSC \\ QAM64/256 | +
-| HDHR3-DT | DVB-T | +
- +
-^ Tuners | 2 | +
-^ Works with DVR | No | +
-^ Ports | Power, Ethernet (100baseTX), Antenna | +
-^ Power supply | <wrapper>5V 1A regulated power adapter (higher A rating ok) \\ +
-2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ +
-Max 5.25V @ no-load \\ +
-Min 4.75V @ 1A \\ +
-Noise <= 100mVp-p</wrapper> |  +
-</WRAP> +
- +
-===== Guides ===== +
-  * [[Using the app with older HDHRs]] +
-  * [[Third party applications]] +
- +
-{{tag>hardware legacy}}+
  • Last modified: 2019/06/20 04:28