Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
nextpvr [2019/07/01 01:48]
neds [Setting up (NextPVR v4)]
nextpvr [2019/08/29 01:38] (current)
neds
Line 4: Line 4:
  
 ===== Setting up (NextPVR v4) ===== ===== Setting up (NextPVR v4) =====
 +<WRAP indent>
 +
 <WRAP center info 80%>If you are using NextPVR v5 or later, the instructions for setting up an HDHomeRun will be different.</​WRAP>​ <WRAP center info 80%>If you are using NextPVR v5 or later, the instructions for setting up an HDHomeRun will be different.</​WRAP>​
  
 ==== NextPVR Configuration – ATSC/​QAM/​DVB-T/​DVB-C ==== ==== NextPVR Configuration – ATSC/​QAM/​DVB-T/​DVB-C ====
 +<WRAP indent>
 +
   - Download and install the latest HDHomeRun software from **[[downloads]]**.   - Download and install the latest HDHomeRun software from **[[downloads]]**.
   - Open **HDHomeRun Setup**.   - Open **HDHomeRun Setup**.
Line 36: Line 40:
   - Click **OK**.   - Click **OK**.
  
 +</​WRAP>​
 ==== NextPVR Configuration – HDHomeRun PRIME ==== ==== NextPVR Configuration – HDHomeRun PRIME ====
 +<WRAP indent>
  
   - Download and install the latest HDHomeRun software from **[[downloads]]**.   - Download and install the latest HDHomeRun software from **[[downloads]]**.
Line 58: Line 63:
   - Follow the instructions in the **Schedules Direct** section below to configure EPG data.   - Follow the instructions in the **Schedules Direct** section below to configure EPG data.
  
 +</​WRAP>​
 ==== Schedules Direct configuration (North America only) ==== ==== Schedules Direct configuration (North America only) ====
 +<WRAP indent>
  
 Note: you must have a subscription to **[[http://​www.schedulesdirect.org/​|Schedules Direct]]** in order to use their EPG data. This is required for any EPG data for HDHomeRun PRIME, and recommended for ATSC/clear QAM. Note: you must have a subscription to **[[http://​www.schedulesdirect.org/​|Schedules Direct]]** in order to use their EPG data. This is required for any EPG data for HDHomeRun PRIME, and recommended for ATSC/clear QAM.
Line 71: Line 78:
   - Click **OK**.   - Click **OK**.
  
 +</​WRAP>​
 +</​WRAP>​
 ===== FAQ ===== ===== FAQ =====
 +<WRAP indent>
 +
 <btn type="​success"​ size="​xs"​ icon="​fa fa-chevron-right">​[[:​FAQ|See also: other FAQ listings]]</​btn>​ <btn type="​success"​ size="​xs"​ icon="​fa fa-chevron-right">​[[:​FAQ|See also: other FAQ listings]]</​btn>​
 +
 ==== No Channels Found in Scan ==== ==== No Channels Found in Scan ====
 +<WRAP indent>
  
 Check your firewall configuration and make sure that the NextPVR, NRecord, and NDigitalHost programs have full network access. Check your firewall configuration and make sure that the NextPVR, NRecord, and NDigitalHost programs have full network access.
Line 81: Line 94:
 For HDHomeRun PRIME, make sure that you are running a firmware version of 20130328 or newer and that you have completed a channel scan in HDHomeRun Setup. For HDHomeRun PRIME, make sure that you are running a firmware version of 20130328 or newer and that you have completed a channel scan in HDHomeRun Setup.
  
 +</​WRAP>​
 ==== No video or audio ==== ==== No video or audio ====
 +<WRAP indent>
  
 Check your firewall configuration and make sure that the NextPVR, NRecord, and NDigitalHost programs have full network access. Check your firewall configuration and make sure that the NextPVR, NRecord, and NDigitalHost programs have full network access.
  
 In the codec configuration area in NextPVR, make sure that you have selected decoders for MPEG2, H.264, and AC3. In the codec configuration area in NextPVR, make sure that you have selected decoders for MPEG2, H.264, and AC3.
 +
 +</​WRAP>​
 +</​WRAP>​
  
 {{tag>​third_party_app}} {{tag>​third_party_app}}
  • Last modified: 2019/08/29 01:38