Differences

This shows you the differences between two versions of the page.

--- prime [2019/06/11 02:48] – created neds
+++ prime [2025/07/21 21:20] (current) – [Other PRIMEs] neds
@@ Line 1: / Line 1: @@
-<WRAP center round help 80%>
+====== HDHomeRun PRIME ======
-**Please bear with us as we transition our documentation to our new info website.**
+<lead>The HDHomeRun PRIME is used for US cable TV, using CableCARD.</lead>
+{{:prime_front_with_roundel.png?direct&300|HDHR3-CC Front}}{{:prime_back.png?direct&300|HDHR3-CC Back}}
+<WRAP box>
+^ Model number    | HDHR3-CC |
+^ Signal type     | US Cable TV & QAM64/256 |
+^ Tuners          | 3 |
+^ Works_with_DVR  | Yes |
+^ Size            | |
+^ Ports           | Coaxial-in, USB (for Tuning Adapter), Ethernet (1000BASE-T), Power, M-card (CableCARD) slot |
+^ Power supply    | <wrapper> 5Volt 2.5Amp regulated power adapter (higher Amp rating ok) \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ Max 5.25V @ no-load \\  Min 4.75V @ 2.5A \\ Noise <= 100mVp-p \\  \\ Normal operating current is approximately 1.25A with a CableCARD present and 3 tuners streaming. \\ \\  <wrap info>For testing purposes a 5V 2A power adapter can be used as long as the USB port is not powering any bus-powered devices.</wrap>      </wrapper>  |
 </WRAP>
+===== Other PRIMEs =====
+In addition to the more common HDHomeRun PRIME HDHR3-CC:
+  * HDHR3-6CC-3x2 - a dual unit that uses two CableCARDs.
+===== Updating firmware======
+<WRAP indent>
+<btn type="success" size="lg" icon="fa fa-chevron-right">[[:update|See: Updating firmware]]</btn>
+</WRAP>
+===== FAQ =====
+<btn type="success" size="lg" icon="fa fa-chevron-right">[[:PRIME:FAQ|See: PRIME:FAQ]]</btn>
+===== Diagnostics =====
+<btn type="success" size="lg" icon="fa fa-chevron-right">[[:PRIME:Diagnostics|See: PRIME:Diagnostics]]</btn>
+===== DRM-restricted channels =====
+<btn type="success" size="lg" icon="fa fa-chevron-right">[[drm|Troubleshooting:Requirements to playback drm-restricted channels]]</btn>
+===== LED status =====
+  * Left LED: Power/link: Green = Ethernet link, flashing = searching for DHCP, red = no Ethernet link.
+  * 2nd LED: Cablecard: Green = CableCARD present, flashing = card present but not ready (authentication in progress or no RF feed).
+  * Tuner LEDs (3) (only on early models): Green = streaming video, flashing = reserved for use but not streaming.
+{{tag>prime hardware}}

prime hardware