Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
prime [2019/06/20 03:23] – nedsprime [2025/07/21 21:20] (current) – [Other PRIMEs] neds
Line 1: Line 1:
 ====== HDHomeRun PRIME ====== ====== HDHomeRun PRIME ======
-<lead>This page describes technical documentation and guides for the PRIME family of HDHomeRun tuners.</lead>+<lead>The HDHomeRun PRIME is used for US cable TV, using CableCARD.</lead>
  
-{{ :prime_front_with_roundel.png?direct&250|HDHR3-CC Front}}{{ :prime_back.png?direct&250|HDHR3-CC Back}}<WRAP clear/>+{{:prime_front_with_roundel.png?direct&300|HDHR3-CC Front}}{{:prime_back.png?direct&300|HDHR3-CC Back}} 
 +<WRAP box> 
 +^ Model number    | HDHR3-CC | 
 +^ Signal type     | US Cable TV & QAM64/256 | 
 +^ Tuners          | 3 | 
 +^ Works_with_DVR  | Yes | 
 +^ Size            | | 
 +^ Ports           | Coaxial-in, USB (for Tuning Adapter), Ethernet (1000BASE-T), Power, M-card (CableCARD) slot | 
 +^ Power supply    | <wrapper> 5Volt 2.5Amp regulated power adapter (higher Amp rating ok) \\ 2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ Max 5.25V @ no-load \\  Min 4.75V @ 2.5A \\ Noise <= 100mVp-p \\  \\ Normal operating current is approximately 1.25A with a CableCARD present and 3 tuners streaming. \\ \\  <wrap info>For testing purposes a 5V 2A power adapter can be used as long as the USB port is not powering any bus-powered devices.</wrap>      </wrapper>  | 
 +</WRAP>
  
-<WRAP box 60%> +===== Other PRIMEs ===== 
-^ Model numbers  ^ Signal type  ^ +In addition to the more common HDHomeRun PRIME HDHR3-CC: 
-| HDHR3-CC | <wrapper> US Cable TV \\ +
-QAM64/256</wrapper> |+
  
-----+  * HDHR3-6CC-3x2 - a dual unit that uses two CableCARDs. 
 +===== Updating firmware====== 
 +<WRAP indent> 
 + 
 +<btn type="success" size="lg" icon="fa fa-chevron-right">[[:update|See: Updating firmware]]</btn>
  
-^ Tuners | 3 | 
-^ Works with DVR | Yes | 
-^ Size |  |  
-^ Ports | Power, Ethernet (1000BASE-T), coaxial-in, M-card (CableCARD) slot, USB (for Tuning Adapter) | 
-^ Power supply | <wrapper>5V 2.5A regulated power adapter (higher A rating ok) \\ 
-2.1mm ID / 5.5mm OD plug, 9-10mm depth, center positive \\ 
-Max 5.25V @ no-load \\ 
-Min 4.75V @ 2.5A \\ 
-Noise <= 100mVp-p \\ 
-Normal operating current is approximately 1.25A with a CableCARD present and 3 tuners streaming. \\ 
-<wrap info>For testing purposes a 5V 2A power adapter can be used as long as the USB port is not powering any bus-powered devices.</wrap></wrapper> |  
 </WRAP> </WRAP>
- 
-===== Model numbers ===== 
-HDHomeRun PRIME 
-  * HDHR3-CC - the more common model 
-  * HDHR3-6CC-3X2 - a dual unit that basically contained two PRIME units in a single housing. 
- 
-HDHomeRun PRIME 6 
-  * HDHR5-6CC - a new six tuner PRIME that is currently in development, that we hope to release in 2019. 
  
  
Line 38: Line 30:
 ===== Diagnostics ===== ===== Diagnostics =====
  
-<btn type="success" size="lg" icon="fa fa-chevron-right">[[:PRIME:Diagnostics |See: PRIME:Diagnostics]]</btn>+<btn type="success" size="lg" icon="fa fa-chevron-right">[[:PRIME:Diagnostics|See: PRIME:Diagnostics]]</btn>
 ===== DRM-restricted channels ===== ===== DRM-restricted channels =====
  
-<btn type="success" size="lg" icon="fa fa-chevron-right">[[:Troubleshooting:Requirements to playback drm-restricted channels|Troubleshooting:Requirements to playback drm-restricted channels]]</btn>+<btn type="success" size="lg" icon="fa fa-chevron-right">[[drm|Troubleshooting:Requirements to playback drm-restricted channels]]</btn>
 ===== LED status ===== ===== LED status =====
  
-**3CC** 
   * Left LED: Power/link: Green = Ethernet link, flashing = searching for DHCP, red = no Ethernet link.   * Left LED: Power/link: Green = Ethernet link, flashing = searching for DHCP, red = no Ethernet link.
   * 2nd LED: Cablecard: Green = CableCARD present, flashing = card present but not ready (authentication in progress or no RF feed).   * 2nd LED: Cablecard: Green = CableCARD present, flashing = card present but not ready (authentication in progress or no RF feed).
-  * Tuner LEDs (3): Green = streaming video, flashing = reserved for use but not streaming. +  * Tuner LEDs (3) (only on early models): Green = streaming video, flashing = reserved for use but not streaming.
  
-**6CC** 
-  * Left two LEDs: Power/link: Green = Ethernet link, flashing = searching for DHCP, red = no Ethernet link. 
-  * 2nd two LEDs: Cablecard: Green = CableCARD present, flashing = card present but not ready (authentication in progress or no RF feed). 
-  * Tuner LEDs (6): Green = streaming video, flashing = reserved for use but not streaming. 
  
 {{tag>prime hardware}} {{tag>prime hardware}}
  • Last modified: 2019/06/20 03:23