Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
tech [2026/03/27 02:10] – nedstech [2026/04/11 01:39] (current) – neds
Line 5: Line 5:
 <WRAP indent> <WRAP indent>
  
 +==== Current models ====
 +<WRAP indent>
 +
 +^ Model numbers  ^ Tuners ^ Signal type ^ Size ^ 
 +^ TECH5-16US-4X4 | 16 (4 modules of 4 tuners) | ATSC 1.0, QAM64/256 | 1U 19" rack-mount | 
 +| | //Power supply information and other notes:// \\  |||
 +^ TECH5-16DT-4X4 | 16 (4 modules of 4 tuners) | DVB-T1, DVB-T2, DVB-C | 1U 19" rack-mount | 
 +| | //Power supply information and other notes:// \\  |||
 +^ TECH-4K | 4 (1 module of 4 tuners) | **Tuners 0+1:** ATSC 3.0, ATSC 1.0, QAM64/256 \\ **Tuners 2+3:** ATSC 1.0, QAM64/256 | 3.4"x3.4"x0.8" | 
 +| | //Power supply information and other notes:// \\ <wrap>5Volt 1.5Amp regulated power adapter (higher Amp rating ok) \\  1.7mm ID / 4.0mm OD plug, 9.5mm depth, center positive \\  Max 5.25V @ no-load \\  Min 4.75V @ 1.5A \\  Noise <= 150mVp-p </wrap> |||
 +^ TECH5-4K8-2X4 | 8 (4 modules of 2 tuners) | ATSC 3.0, ATSC 1.0, QAM64/256 | 1U 19" rack-mount | 
 +| | //Power supply information and other notes:// \\  |||
 +
 +</WRAP>
 +==== Past models (still supported) ====
 +<WRAP indent>
 +
 +<button collapse="past">Click to see table of past models</button>
 + 
 +<collapse id="past" collapsed="true">
 +
 +^ Model numbers  ^ Tuners ^ Signal type ^ Size ^ 
 +| TECH-US | 
 +| TECH3-US | 
 +| TECH3-8US-2X4 | 
 +| TECH4-2US | 
 +| TECH4-8US-2X4 | 
 +| TECH4-8IS-2X4 | 
 +| TECH3-EU | 
 +| TECH3-8EU-2X4 | 
 +| TECH4-2DT | 
 +| TECH4-8DT-2X4 | 
 +| TECH3-6CC-3X2 | 
 +| TECH3-3CC | 
 +| TECH3-8DC-4X2 | 
 +| TECH5-16DC-4X4 | 
 +</collapse>
 +
 +</WRAP>
 +==== LEDs and ports ====
 +<WRAP indent>
 +
 +
 +
 +</WRAP>
 +==== Power ====
 +<WRAP indent>
 +
 +All devices should be used with the included power supply or power cable.
 +
 +</WRAP>
 ==== Ethernet ==== ==== Ethernet ====
 <WRAP indent> <WRAP indent>
Line 25: Line 76:
 <WRAP indent> <WRAP indent>
  
-Download and install the latest Windows release of the HDHomeRun software: https://download.silicondust.com/hdhomerun/hdhomerun_tech_windows.exe+Download and install the latest Windows release of TECH Setup utility: https://download.silicondust.com/hdhomerun/hdhomerun_tech_windows.exe
  
 The HDHomeRun Setup wizard is optional. The HDHomeRun Setup wizard is optional.
Line 35: Line 86:
 <WRAP indent> <WRAP indent>
  
-Download and extract the libhdhomerun archive.+Download and extract the libhdhomerun archive: https://download.silicondust.com/hdhomerun/libhdhomerun.tgz
  
 Run "make" to compile hdhomerun_config (systems that use a non-GNU make by default may need to install and use "gmake" instead). Run "make" to compile hdhomerun_config (systems that use a non-GNU make by default may need to install and use "gmake" instead).
Line 110: Line 161:
 <code> <code>
 /card/status Get status of CableCARD (6CC only) /card/status Get status of CableCARD (6CC only)
-/oob/channel <modulation>:<freq> Get/set out of band channel (6CC only) +/oob/channel <modulation>:<freq> Get/set out of band channel (TECH3-CC only) 
-/oob/debug Get out of band channel debug info (6CC only) +/oob/debug Get out of band channel debug info (TECH3-CC only) 
-/oob/status Get out of band channel status info (6CC only)+/oob/status Get out of band channel status info (TECH3-CC only)
 /sys/boot <config> Get/set boot configuration /sys/boot <config> Get/set boot configuration
 /sys/copyright Get copyright information /sys/copyright Get copyright information
Line 120: Line 171:
 /sys/ipaddr dhcp|"<ip> <mask> <gw> <dns>" Get/set system IP address /sys/ipaddr dhcp|"<ip> <mask> <gw> <dns>" Get/set system IP address
 /sys/model Get/set model string /sys/model Get/set model string
-/sys/restart <resource> Restart device/component+/sys/restart <resource> Restart device/component, example "restart self" will reboot the unit
 /sys/version Get firmware version /sys/version Get firmware version
 /tuner<n>/channel <modulation>:<freq|ch> Get/set channel /tuner<n>/channel <modulation>:<freq|ch> Get/set channel
Line 132: Line 183:
 /tuner<n>/status Get tuner status /tuner<n>/status Get tuner status
 /tuner<n>/target <ip>:<port> Get/set stream target /tuner<n>/target <ip>:<port> Get/set stream target
-/tuner<n>/vchannel <vchannel> Get/set virtual channel number (6CC only) +/tuner<n>/target forward ATSC 3.0 only. Forwards all multicast IP packets to the LAN 
-/tuner<n>/vstatus Get/set subscription/protection status (6CC only)+/tuner<n>/vchannel <vchannel> Get/set virtual channel number (TECH3-CC, TECH4 and later) 
 +/tuner<n>/vstatus Get/set subscription/protection status (TECH3-CC only) 
 +/tuner<0|1>/plpinfo ATSC 3.0 only 
 +/tuner<0|1>/l1detail ATSC 3.0 only
 </code> </code>
 </WRAP> </WRAP>
Line 323: Line 377:
 <WRAP indent> <WRAP indent>
  
-TECH3 and later supports automatic PID filtering by program number or virtual channel number:+Automatic PID filtering by program number or virtual channel number:
  
 <WRAP indent> <WRAP indent>
Line 418: Line 472:
 </WRAP> </WRAP>
  
-The target machine must be listening on the given UDP port. The TECH3 will automatically clear the target if a ICMP port unreachable message is received when sending to a unicast address. To override this, add no_clear to the target.+The target machine must be listening on the given UDP port. The TECH will automatically clear the target if a ICMP port unreachable message is received when sending to a unicast address. To override this, add no_clear to the target.
  
 <WRAP indent> <WRAP indent>
Line 503: Line 557:
 ===== HTTP Streaming ===== ===== HTTP Streaming =====
 <WRAP indent> <WRAP indent>
-TECH3-CC and TECH4 and later models can be used to stream via HTTP (unicast only) to VLC or other clients.+<btn type="success" size="xs" icon="fa fa-chevron-right">[[:http_api|See also: HTTP API documentation]]</btn> 
 + 
 +TECH3-CC, TECH4, and later models can be used to stream via HTTP (unicast only) to VLC or other clients.
  
 <WRAP indent> <WRAP indent>
Line 514: Line 570:
 </WRAP> </WRAP>
  
-===== Lineup file (TECH3-CC only) =====+===== Lineup file =====
 <WRAP indent> <WRAP indent>
-TECH3-CC units support virtual channel lineup information transmitted by the cable provider and received via the CableCARD. This is available in XML and JSON format.+TECH3-CC, TECH4, and later models support virtual channel lineup information. This is available in XML and JSON format.
  
 <WRAP indent> <WRAP indent>
Line 530: Line 586:
 <WRAP indent> <WRAP indent>
  
-TECH3 units support Datacast TCP/IP over OTA broadcast. Datacasting often provides news, weather, traffic, stock market, and other information which may or may not relate to the program[s] it is carried with. An electronic program guide is usually included. Datacast TCP-IP packets are reassembled and then routed to the LAN port.+TECH units support Datacast TCP/IP over OTA broadcast. Datacasting often provides news, weather, traffic, stock market, and other information which may or may not relate to the program[s] it is carried with. An electronic program guide is usually included. Datacast TCP-IP packets are reassembled and then routed to the LAN port.
  
 Example: Example:
Line 568: Line 624:
 </WRAP> </WRAP>
  
-===== Using /sys/boot =====+===== Boot scripts =====
 <WRAP indent> <WRAP indent>
  
Line 593: Line 649:
 </code> </code>
 </WRAP> </WRAP>
 +
 +To place a wait period between commands you can use the "sleep" command followed by the number of seconds:
 +
 +<WRAP indent>
 +<code>
 +<first command>
 +
 +sleep 60
 +
 +<next command>
 +</code>
 +</WRAP>
 +
  
 To store the configuration to the device: To store the configuration to the device:
Line 612: Line 681:
 </WRAP> </WRAP>
  
-==== Static IP assignment ====+</WRAP> 
 +===== Static IP assignment =====
 <WRAP indent> <WRAP indent>
  
Line 626: Line 696:
 Note: The TECH requires a gateway when used to stream multicast, even if on the same subnet. Note: The TECH requires a gateway when used to stream multicast, even if on the same subnet.
  
-</WRAP> 
 ==== Reverting to DHCP ==== ==== Reverting to DHCP ====
 <WRAP indent> <WRAP indent>
Line 637: Line 706:
 Example: hdhomerun_config 169.254.34.98 set /sys/ipaddr dhcp Example: hdhomerun_config 169.254.34.98 set /sys/ipaddr dhcp
 </code> </code>
 +</WRAP>
 +
 +<WRAP info>
 +If you cannot access the TECH due to the IP address change, do the following to reset:
 +
 +Set a static IP on the computer in the 169.254.x.y range (e.g. 169.254.1.9) with a 255.255.0.0 subnet mask. The auto IP address for the TECH device will be randomly chosen within the 169.254.x.y range. Use the [[https://download.silicondust.com/hdhomerun/hdhomerun_tech_windows.exe|TECH Config GUI]] to locate it and reset the IP.
 </WRAP> </WRAP>
  
Line 660: Line 735:
 </WRAP> </WRAP>
  
-Channel maps supported by HDHR-TECH-US hardware:+Channel maps supported by US hardware:
  
 <WRAP indent> <WRAP indent>
Line 670: Line 745:
 </WRAP> </WRAP>
  
-Channel maps supported by HDHR-TECH-EU hardware:+Channel maps supported by DVB hardware:
  
 <WRAP indent> <WRAP indent>
Line 686: Line 761:
 <WRAP indent> <WRAP indent>
  
-TECH3 supports multicast streaming within a network.+TECH supports multicast streaming within a network.
  
   - Using HDHomeRun Config GUI or hdhomerun_config choose a desired channel and program number for each tuner. In this example we will use channel 19 program 3 on tuner 0 and channel 30 program 1 on tuner 1.   - Using HDHomeRun Config GUI or hdhomerun_config choose a desired channel and program number for each tuner. In this example we will use channel 19 program 3 on tuner 0 and channel 30 program 1 on tuner 1.
Line 769: Line 844:
 </code> </code>
 </WRAP> </WRAP>
 +
 +</WRAP>
 +===== HDHomeRun app =====
 +<WRAP indent>
 +
 +{{ :tech_guide.png?direct&400|}}
 +When using the TECH3-CC or TECH4 and later, the consumer [[:app|HDHomeRun app]] can be used, allowing the TECH to behave as a consumer HDHomeRun unit. To enable this the TECH will need to sync with the HDHomeRun guide server on the internet:
 +
 +  - Access the web interface of the TECH unit //(for example, <nowiki>http://192.168.0.49</nowiki> )//
 +  - Check the option **"Sync with guide server"**
 +  - All other features of the TECH can still be used in this mode.
 +
 +<WRAP clear/>
  
 </WRAP> </WRAP>
  • Last modified: 2026/03/27 02:10