Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
update [2021/05/12 01:30] – nedsupdate [2023/04/08 12:11] (current) – neds
Line 1: Line 1:
 ====== Updating your HDHomeRun ====== ====== Updating your HDHomeRun ======
  
-<lead>The HDHomeRun app or the **[[myhdhomerun]]** web page might inform the user that a firmware update is available for their HDHomeRun. These updates contain important bug fixes and feature enhancements, and should be installed as soon as reasonably possible.</lead>+<lead>The HDHomeRun app or the HDHomeRun's web interface might inform the user that a firmware update is available for their HDHomeRun. These updates contain important bug fixes and feature enhancements, and should be installed as soon as reasonably possible.</lead>
  
 ===== Firmware updating ===== ===== Firmware updating =====
 <WRAP indent> <WRAP indent>
-==== Updating from my.hdhomerun.com ====+==== Updating from the web interface ====
 <WRAP indent> <WRAP indent>
  
-Users of the following HDHomeRun products can update directly through the [[myhdhomerun]] web page, while connected to the same local network as your HDHomeRun unit:+Users of the following HDHomeRun products can update directly through your web browser, while connected to the same local network as your HDHomeRun unit:
  
 <WRAP group> <WRAP group>
Line 16: Line 16:
   * CONNECT 4K (ATSC 3.0)   * CONNECT 4K (ATSC 3.0)
   * SCRIBE DUO/QUATRO/4K   * SCRIBE DUO/QUATRO/4K
-  * FLEX DUO/4K+  * FLEX DUO/QUATRO/4K
 </WRAP> </WRAP>
 <WRAP half column> <WRAP half column>
Line 28: Line 28:
 <WRAP center info>If your current version of firmware is **before 20170815** then you will first need to update using one of the other methods mentioned below on this page.</WRAP> <WRAP center info>If your current version of firmware is **before 20170815** then you will first need to update using one of the other methods mentioned below on this page.</WRAP>
  
-  - While connected to the same local network as your HDHomeRun, open this link in a web browser: http://my.hdhomerun.com +  - While connected to the same local network as your HDHomeRun, open this link in a web browser: http://hdhomerun.local 
-  - You should see all of your HDHomeRun products listed on this page. If not, please see the [[myhdhomerun]] help page. +    - <wrap tip>NOTE:</wrap> That address will go do the first HDHomeRun device found on your network. If you have more than one HDHomeRun device, use the "device ID" printed on the bottom of the unit instead of "hdhomerun" in the address. For example, if your device ID was 104FFFFF then you would go to http://104fffff.local 
-  - HDHomeRun products that have a pending update will show a red X next to their version number. Click on that version number link. +    - <wrap tip>NOTE:</wrap> If the .local addresses do not work for whatever reason, you can also use the IP address of your HDHomeRun unit. For example, if your router shows your HDHomeRun with an IP address of 10.0.3.28, then you would use the link http://10.0.3.28 
-  - You should see a button at the bottom of that page to start the firmware update process. +  - HDHomeRun products that have a pending update will show a button at the bottom of that page to start the firmware update process. 
   - The HDHomeRun will then update and reboot   - The HDHomeRun will then update and reboot
-  - Check the http://my.hdhomerun.com page to see if the update was successful.+  - Check the http://hdhomerun.local page to see if the update was successful.
  
 </WRAP> </WRAP>
Line 50: Line 50:
   - Just by starting up the HDHomeRun Setup utility, it will look for and update all HDHomeRun products on your local network.   - Just by starting up the HDHomeRun Setup utility, it will look for and update all HDHomeRun products on your local network.
  
-**Done:** Your HDHomeRun units should now be up to date. Go to http://my.hdhomerun.com to check to see if there are green check marks by the version numbers for your devices.+**Done:** Your HDHomeRun units should now be up to date.
  
 </WRAP> </WRAP>
Line 72: Line 72:
   - If you haven't already done so, you can also press **Close** on the installer itself. This will prompt the installer to ask if you want to delete the HDHomeRun install file or safe it for later. You can safely **delete** the installer file.   - If you haven't already done so, you can also press **Close** on the installer itself. This will prompt the installer to ask if you want to delete the HDHomeRun install file or safe it for later. You can safely **delete** the installer file.
  
-**Done:** Your HDHomeRun units should now be up to date. Go to http://my.hdhomerun.com to check to see if there are green check marks by the version numbers for your devices.+**Done:** Your HDHomeRun units should now be up to date. 
  
 </WRAP> </WRAP>
Line 84: Line 84:
   - Run the terminal command <code>hdhomerun_config <id> upgrade <filename></code> where   - Run the terminal command <code>hdhomerun_config <id> upgrade <filename></code> where
     * <id> is the device ID of your HDHomeRun unit. If you only have one HDHomeRun device on your network, you can use the ID "FFFFFFFF". Do not use "FFFFFFFF" if you have multiple HDHomeRun units on your network.     * <id> is the device ID of your HDHomeRun unit. If you only have one HDHomeRun device on your network, you can use the ID "FFFFFFFF". Do not use "FFFFFFFF" if you have multiple HDHomeRun units on your network.
-    * Device IDs can be found printed on the bottom of the HDHomeRun units, listed on the my.hdhomerun.com web page, or by running the command <code>hdhomerun_config discover</code>+    * Device IDs can be found printed on the bottom of the HDHomeRun units or by running the command <code>hdhomerun_config discover</code>
     * <filename> is the .bin firmware filename you downloaded from the previous step     * <filename> is the .bin firmware filename you downloaded from the previous step
  
Line 90: Line 90:
   * For example, your command might look like this <code>hdhomerun_config 10411117 upgrade hdhomerun4_atsc_firmware_20190621.bin</code>   * For example, your command might look like this <code>hdhomerun_config 10411117 upgrade hdhomerun4_atsc_firmware_20190621.bin</code>
  
-**Done:** Your HDHomeRun units should now be up to date. Go to http://my.hdhomerun.com to check to see if there are green check marks by the version numbers for your devices.+**Done:** Your HDHomeRun units should now be up to date. 
  
  
  • Last modified: 2021/05/12 01:30