Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| upnp_multicast_recv_test [2024/01/18 20:34] – neds | upnp_multicast_recv_test [2024/01/18 20:43] (current) – neds | ||
|---|---|---|---|
| Line 36: | Line 36: | ||
| * **Actiontec MI424WR routers:** (commonly used with FiOS), go into Advanced, then IGMP Proxy, and try with the IGMP Proxy setting both Disabled and Enabled. If you are using a rev I router with the latest firmware and do not have the IGMP Proxy link, log in to your router then go to http:// | * **Actiontec MI424WR routers:** (commonly used with FiOS), go into Advanced, then IGMP Proxy, and try with the IGMP Proxy setting both Disabled and Enabled. If you are using a rev I router with the latest firmware and do not have the IGMP Proxy link, log in to your router then go to http:// | ||
| * **Routers running DD-WRT firmware:** go into Security, then Firewall, and uncheck Filter Multicast | * **Routers running DD-WRT firmware:** go into Security, then Firewall, and uncheck Filter Multicast | ||
| - | If the test continues to fail: | + | - Retest. If the test continues to fail then keep going on this list |
| + | - If you have a managed switch try bypassing the switch and repeating the test. If this resolves the problem, log into the switch and look for options relating to Multicast. Test with IGMPv3 snooping enabled, with IGMP snooping disabled, etc. If the test continues to fail: | ||
| + | - If you have VirtualBox installed try disabling the “VirtualBox Host-Only Network Adapter” in Device Manager. If the test continues to fail: | ||
| + | - Reset the Ethernet configuration by going into Device Manager, deleting the Ethernet adapter (keep files), then rebooting the computer. When Windows starts back up it should automatically detect and enable the Ethernet adapter driver again. | ||
| - | If you have a managed switch try bypassing the switch and repeating the test. If this resolves the problem, log into the switch and look for options relating to Multicast. Test with IGMPv3 snooping enabled, with IGMP snooping disabled, etc. If the test continues to fail: | + | ==== Technical information about the test ==== |
| - | If you have VirtualBox installed try disabling the “VirtualBox Host-Only Network Adapter” in Device Manager. If the test continues to fail: | + | |
| - | Reset the Ethernet configuration by going into Device Manager, deleting the Ethernet adapter (keep files), then rebooting the computer. When Windows starts back up it should automatically detect and enable the Ethernet adapter driver again. | + | |
| - | Technical information about the test: | + | |
| HDHomeRun Setup triggers the HDHomeRun to send a series of SSDP NOTIFY packets to the 239.255.255.250 multicast group. | HDHomeRun Setup triggers the HDHomeRun to send a series of SSDP NOTIFY packets to the 239.255.255.250 multicast group. | ||
| + | |||
| These packets were not received by the PC running HDHomeRun Setup. | These packets were not received by the PC running HDHomeRun Setup. | ||
| + | |||
| + | {{tag> | ||